Full Adsorption High Speed Printer Box packaging Linkage Line

• Customization: Available
• After-sales Service: 12 Month
• Warranty: 12 Month
• Model NO.: DG1220
• Condition: New
• Certification: RoHS, ISO 9001:2000, ISO 9001:2008, CE
• Automation: Automatic
• Suitable for: Recycled Material, Wood, Paper
• Paper Thickness: Corrugated Cardboard
• Voltage: 220V / 380V / 440V
• Productive Cycle: 30-60 Days
• Size: Support Customization
• Colors: Support Customization
• Logo: Support Customization
• Transport Package: Plastic Wrapped Film or Wooden Box Packaging
• Trademark: Zhanzhuo
• Origin: Hebei China
• HS Code: 84413090
• Production Capacity: 100 Set/Year

Product Description

 

High speed automatic flexo printer slotter die cutter folder gluer strapping line 

Detailed Photos

Product Parameters

 

The box pasting machine of printing slotting machine produced by our company has the advantages of simple structure, high box folding accuracy and beautiful box folding. Its electrical, bearing, belt chain and other important components are all products of famous enterprises in Europe, America, Japan and Taiwan Province. The machine has the advantages of smooth track, low noise, high efficiency, simple operation, good safety and reliability, and is the first product for enterprises to get rich.
1. Folding box gluing machine (upper printing type).
2. The front part of the upper conveyor belt adopts elastic rollers, and the rear part is a vacuum adsorption part, and the gap can be adjusted according to the cardboard thickness.
3. The lower belt is driven by an independent motor, which makes it difficult for the cardboard to deviate when entering.
4. The new "sandwich" structure can effectively control the size of the mouth.
5. Glue spraying device can be selected: Italian ERO 
6. The counting and stacking machine is controlled by servo motor to accurately control the number of sheets per bundle.
Introduce the technological process and technical parameters of this product as follows
1.Glue
The gluing department adopts a non-stop or gluing system to prevent the glue from solidifying when the machine starts at the end of a short time. The gap of gluing wheel can be adjusted conveniently, and another engraving disk can adapt to gluing of 1-8mm thick paper, and the gluing amount can be adjusted conveniently.
2.Paper Folding
A. The speed of the upper and lower beam belts is coordinated with that of the slotting machine, and the pasting belt and conveying belt are very close to that of the slotting machine, so that the paper grabbing or blocking problem between the pasting box line and the slotting machine can be avoided, and the paper receiving is more accurate;
B. The upper and lower belt speeds can be adjusted separately, that is, when the upper and lower belt speeds are different, they can be adjusted to be the same.
C. The origami is made of belt and glue stick, which can conveniently adjust the angle of origami and is easy to operate.
3. Preloading
Pre-pressing degree, with adjustable gap between upper and lower sticks, can press 1-8mm paper folding box, and it is convenient to adjust with dial, and can also be directly input by touch screen to make the machine automatically adjust.
4. Counting stacking
The stacking machine is driven by servo motor, realizing full automation, accurately controlling the number of sheets in each bundle, pressing the sheets evenly, and pushing the sheets by computer to count and discharge accurately.

Parameters of the machine
Maximum box sticking speed	200 /min
Minimum box size of folding box (A*B)	Straight:360*300 Counter:320*300(mm)
Maximum box size of folding box (A*B)	1200* 1200(mm)
Total motor power	40KW
Total mechanical volume	25500*4000*3700(mm)

Preliminary debugging operation of the machine
The preliminary debugging of the machine is the preparatory work before production after the installation of the machine. The quality of debugging not only affects the service life of the machine, but also affects the production schedule and the quality of equipment and products. Therefore, it is necessary to do a good job of debugging before production. The following debugging steps of this machine are introduced for use by crew and debugging personnel.
1. The machine can be put into trial operation after all gas circuits, gas sources, circuits and power supplies are connected; First, test the movements of the upper and lower beams, the sheet piling paper counting unit, the blowers and the driving motors at low speed.
2. Start the machine in slow motion for more than 10 minutes, and then slowly increase the speed. In the process of slow motion, listen carefully to all parts of the machine, whether there is any abnormal sound such as metal crash or knock, and then continue to accelerate (the increase in speed each time shall not exceed 10% of the rated speed) until the rated speed of the machine is reached.
3. Close the paper pushing and counting section, open the paper feeding section, folding section, pre-pressing section, etc., and slowly test whether the section has smooth folding and meets the requirements of folding accuracy, and then gradually increase the speed (note: the running speed of the machine shall not exceed the rated speed) after all sections of the folding section are in place.
4. Start the whole machine slowly, test the actions such as paper aligning, counting and pushing, and try to reach the designated position according to the above (to ensure the service life of the machine, the running speed of the machine shall not exceed the rated speed).
5. The above 1, 2, 3 and 4 all refer to the method of the first test run. After the first test run, if you want to change the box type, you only need to start the whole machine and debug the folding box at low speed to meet the size requirements.
Maintenance and lubrication of the machine
Prevention is more important than maintenance, and maintenance is more important than repair. In order to make the production go smoothly and prolong the service life of the machine, please do all the maintenance work of the machine carefully according to the contents of this chapter.
1. Maintenance and lubrication of guide rail
A. clean the oil and dust on the surface of the moving guide rail and roller, and drip a proper amount of engine oil (32#). Please keep the surface of guide rail and roller clean to avoid direct dry grinding without lubricating oil between guide rail and roller.
B. Clean the oil stain on the surface of the traversing chute and apply grease (Mobil MP).
C. add lubricating oil (Mobil MP) to each bearing
2. Maintenance and lubrication of sprocket and gear
A. clean the surface of sprocket and chain with greasy dirt and grease (Mobil MP).
B. clean the oil stains on the surfaces of gears and gear sets and apply grease (Mobil MP).
3. Maintenance and lubrication of motor and reducer
Regularly replace the lubricating oil of the drive reducer (Mobil DTE629), regularly clean the dust on the surface of the motor, and do not wipe it with a damp cloth.
3. Maintenance of belt
A. Conveyor belt is a kind of wear-resistant part, please clean the dirt on the pulley regularly (dirt on the pulley will lead to different speeds of each belt, which will affect the performance of the machine and accelerate the wear of the belt).
B. Do not drip lubricating oil and other oily products on the conveyor belt and pulley, so as not to cause the belt slip and affect the machine performance.
4. Other maintenance
A. regularly clean the drive shaft, move the oil and dust on the surface of the screw rod transversely, and drip the engine oil (32#)
B. Please regularly check fastening screws, belts, keys and other components for looseness or wear.
C. Please clean the dust on the surface of each part of the machine regularly (every day).
Note: The above cycle refers to the maintenance under normal conditions, and please give special treatment under special conditions.

Company Profile

 

Introduction of our company

Zhanzhuo Machinery, professional manufacturer of high-quality corrugated cardboard carton machine, has the right to import and export. Main products are: 3-layer/5-layer/7-layer corrugated board production line, cardboard production line, carton production line, intelligent digital printer machine, automatic high-definition high-speed printing slotting die cutting machine, intelligent automatic high-speed folder gluer machine/stitcher machine/ gluer and stitcher machine, roller paper cutter machine, cardboard flute laminating machine,roller to roller film laminating machine,partition assembler machine, and so on. The products are safe and stable in quality and superior in performance. They have won more than ten national patents and passed ISO9001 quality management system certification and CE EU certification. Our pre-sales and after-sales service are efficient and reliable, customized services, professional remote video guidance and engineers' debugging abroad, and we are at your service 24 hours a day.
Looking around the world, products are exported to the United States, Britain, Germany, South Korea, Australia, Mexico, Turkey, Brazil and many other countries. I can't give you the lowest price, can only give you the highest quality; I would rather explain the price for a while, don't want to apologize for the quality for a lifetime! It has an absolute advantage in the fierce competition in the same industry.
Global trade, honesty first. Choose us and choose the most reliable partner in the world. World-class, set sail from here.
 

Our Advantages

Certifications

Packaging & Shipping

FAQ

Q : Where are you? Is there import and export right? How long have you been in this industry? May I visit your factory?
A : We are in Dongguang County, Cangzhou, Hebei, China. Yes, we have the right to import and export. We have been in this industry for many years, with many years of production experience and international trade export experience. We support personalized customized services. I very much welcome you to our factory.
Q : How long is the production date of the machine? How do we install and debug the machine? Is your after-sales service reliable?
A : The production date of ordinary machines is about 30 days to 60 days, and the production date of large production lines is about 180 days. Engineers will provide remote video guidance and overseas technical support and serve you 24 hours a day.
Q : What are your main products? What are the terms of payment?
A : Main products are: 3-layer/5-layer/7-layer corrugated board production line, cardboard production line, carton production line, intelligent digital printer machine, automatic high-definition high-speed printing slotting die cutting machine, intelligent automatic high-speed folder gluer machine/stitcher machine/ gluer and stitcher machine, roller paper cutter machine, cardboard flute laminating machine,roller to roller film laminating machine,partition assembler machine, and so on.

Deposit 30% in advance and 70% before shipment of the machine.